RCA Satellite TV Antenna manual Dish Assembly Overview, If your reflector looks like the, have

Dish Assembly Overview

Dish Assembly Overview

Use this page both as a parts lists for your satellite antenna, and a general overview of how the

parts fit together; but DON’T ASSEMBLE THE DISH YET.

If your reflector looks like the
one on the left, you should
have:	Flat head bolts

Metal Reflector

Note

If you have a plastic reflector, the bolts are molded into the

• Mounting foot and mast
•	Satellite dish reflector
• LNB (Low Noise Block
	converter)
•	LNB support arm

LNB

Retainer nut

Phillips head screw

LNB support arm

Self-locking nuts

reflector; on metal reflectors, the bolts must be inserted through the holes on the reflector before attaching the reflector to the support arm.

• Hardware packet

Mast

Nut, star washer,

Mounting foot

If you have a Sony reflector, you should have:

•Mounting foot and mast

•Satellite dish reflector

•LNB (Low Noise Block converter) and LNB support arm

LNB

•Hardware packet

hex head bolt

Reflector

Pre-assembled mast clamp

LNB support arm

Mast

Mounting foot

Preparing for Installation 13