RedMax G5300 manual Key To Symbols, Symbols on the machine, Symbols for Canada model

Models: G5300

1 128
Download 128 pages 63.56 Kb
Page 2
Image 2
KEY TO SYMBOLS

KEY TO SYMBOLS

Symbols on the machine:

WARNING! Chain saws can be dangerous! Careless or improper use can result in serious or fatal injury to the operator or others.

Please read the operator’s manual carefully and make sure you understand the instructions before using the machine.

Always wear:

Approved protective helmet

Approved hearing protection

Protective goggles or a visor

Both of the operators hands must be used to operate the chain saw. Never operate a chain saw holding it with one hand only.

Contact of the guide bar tip with any object must be avoided.

WARNING! Kickback may occur when the nose or tip of the guide bar touches an object, and cause a lightning fast reverse reaction, kicking the guide bar up and towards the operator. May cause serious personal injury.

Decompression valve: The valve is to reduce the pressure in the cylinder and make starting easier. You should always use the decompression valve when starting the machine.

Air purge: Device that evacuates air from the fuel system and make starting the engine easier.

Symbols for Canada model:

Recommended cutting equipment in this example: - Bar length 18 inches

-Max. nose radius 10 Teeth

-Chain type Oregon 33 SL

Other approved bar and chain combinations in Operator’s Manual.

Measured maximum kickback value with brake for the bar and chain combination on the label.

Other symbols/decals on the machine refer to special certification requirements for certain markets.

2 – English

Symbols in the operator’s manual:

Switch off the engine by moving the stop switch to the STOP position before carrying out any checks or maintenance.

Ignition; choke: Set the choke control in the choke position. This should automatically set the stop switch to the start position.

Always wear approved protective gloves.

Regular cleaning is required.

Visual check.

Protective goggles or a visor must be worn.

Refuelling.

Filling with oil and adjusting oil flow.

WARNING! Kickback may occur when the nose or tip of the guide bar touches an object, and cause a lightning fast reverse reaction, kicking the guide bar up and towards the operator. May cause serious personal injury.

Page 2
Image 2
RedMax G5300 Key To Symbols, Symbols on the machine, Symbols for Canada model, Symbols in the operator’s manual