INSTALLATION
11)Mount the cast faceplate panels onto the insert body, sliding the side filler brackets into the space between the glass and the firebox. Secure using the 4 remaining black screws, 2 per side.
Slide side filler bracket into gap between glass and fire box.
12)Install the glass trim by inserting the side hooks on the glass trim into the 4 slots between the faceplate and the glass. Push the glass trim down firmly with both hands to lock into place.
Side Hook
Slots
13)To put on the Regency logo, peel the sticker from the back of the logo and place it centered on the bottom left hand corner of the faceplate.
Regency Logo | Left Hand |
| Side Faceplate |
HAMPTON CAST
GRILL INSTALLATION
Before the grills are installed, a grill stop bracket needs to be put in place.
1)The grill stop bracket is installed in the bottom left corner just under the firebox with the screw supplied as shown below.
Grill Stop
Bracket
2)Place top grill into brackets located inside top of firebox as shown.
Bracket inside top of firebox.
Bracket
Top Grill 
Note: The top louver should be placed with the curved
3)The bottom louver, shown in the diagram below, has 2 hinges that are attached to the lip on bottom of the unit. Secure using 2 screws per hinge.
Regency | 13 |
