10. After the High-performance Embedded Workshop has been activated, connect the emulator.
However, it is not needed to connect the emulator immediately after the High-performance
Embedded Workshop has been activated.
To connect the emulator, use one of the methods (a) and (b) below. For operation during
connection, refer to section 3.8, System Check.
(a) Connecting the emulator after the setting at emulator activation
Select [Debug settings] from the [Debug] menu to open the [Debug Settings] dialog box. It
is possible to register the download module or the command chain that is automatically
executed at activation. For details on the [Debug Settings] dialog box, refer to section 4.2,
Setting at E8 Emulator Activation.
After the [Debug Settings…] dialog box has been set, when the dialog box is closed, the
emulator is connected.
54