HumidAire™
You will need a medium size 21" (52 cm) air tube to connect the VPAP Adapt SV unit to the HumidAire™ (see Figure 7).
1Make sure both the HumidAire and the VPAP Adapt SV are turned off.
Fill the HumidAire with water as described in the humidifier manual. Place the filled water chamber inside the HumidAire.
2Gently detach enough of the tube clips to release the end of the pressure sensor tube from the VPAP Adapt SV air tubing.
Connect the VPAP Adapt SV air tubing to the left connector port on the humidifier,
and the medium 21" (52 cm) air tubing to the right connector port. Close the
HumidAire lid.
Medium air tubing
HumidAire 
VPAP Adapt SV air tubing
Pressure sensor tube
3Place the VPAP Adapt SV on top of the HumidAire. Never place the
VPAP Adapt SV unit underneath the humidifier. (This is to avoid water spilling into the unit.)
4Connect the free end of the medium air tubing to the VPAP Adapt SV.
Connect the pressure sensor tube by twisting the Luer lock onto the VPAP Adapt SV (see page 10).
VPAP Adapt SV System | 13 |
