ResMed Adapt SV System manual ResLink, Anti-bacterial Filter

ResLink™

The ResLink is a device that records data onto a SmartMedia™ card during your

therapy. The card can be returned to your clinician so that they can observe your progress and adjust flow generator parameters if necessary. The ResLink connects to the back of VPAP Adapt SV as shown. For full details on using the ResLink, please refer to the ResLink User’s Manual.

Anti-bacterial Filter

Your clinician may recommend that you use an anti-bacterial filter. A filter should be placed in the air tubing between the mask and the flow generator. If using a humidifier, place the filter between it and the flow generator (see Figure 10 below).

Typically, the filter should be replaced daily. Check the filter instructions for full details.

Whenever a filter is added, removed or replaced you must run the Air Circuit Learn function (see “Learn Circuit” on page 22).

Note: Only hydrophobic anti-bacterial filters should be used with a HumidAire 2i.

Anti-bacterial filters

Figure 10: Inserting anti-bacterial filters

VPAP Adapt SV System 15