Guidance and Manufacturer’s Declaration — Electromagnetic Emissions and Immunity
Guidance and manufacturer’s declaration – electromagnetic emissions
The VPAP Adapt SV is intended for use in the electromagnetic environment specified below. The customer or the user of the VPAP Adapt SV should assure that it is used in such an environment.
Emissions test | Compliance | Electromagnetic environment - | |
guidance | |||
|
| ||
|
|
| |
RF emissions CISPR11 | Group 1 | The VPAP Adapt SV uses RF energy | |
|
| only for its internal function. | |
|
| Therefore, its RF emissions are very | |
|
| low and are not likely to cause any | |
|
| interference in nearby electronic | |
|
| equipment. | |
|
|
| |
RF emissions CISPR 11 | Class B | The VPAP Adapt SV is suitable for use | |
|
| in all establishments, including | |
|
| ||
Harmonic Emissions | Class A | domestic establishments and those | |
IEC |
| directly connected to the public low- | |
|
| voltage network that supplies | |
|
| ||
Voltage Fluctuations/Flicker | Complies | buildings used for domestic purposes. | |
Emissions IEC |
|
| |
|
|
|
Medical Electrical Equipment needs special precautions regarding EMC and needs to be installed and put into service according to EMC information provided in this document.
Warnings: The VPAP Adapt SV should not be used adjacent to or stacked with other equipment. If adjacent or stacked use is necessary, the VPAP Adapt SV should be observed to verify normal operation in the configuration in which it will be used.
The use of accessories (eg Humidifiers) other than those specified in this manual is not recommended. They may result in increased emissions or immunity of the VPAP Adapt SV.
Technical Specifications | 43 |
