!
3
WARNING
•Make sure the power cord and plug are in good condition and the equipment is not damaged.
•The air filter cover protects the device in the event of accidental liquid spillage onto the device. Ensure that the air filter and air filter cover are fitted at all times.
Connect one end of the air tubing firmly onto the air outlet of the VPAP III
!
4
5
WARNING
Only ResMed air tubing should be used with your flow generator. A different type of air tubing may alter the pressure you actually receive and reduce the effectiveness of your treatment.
Assemble your mask system according to the mask user instructions.
Connect your mask system to the free end of the air tubing
The VPAP III
Attaching a Humidifier
WARNING
! When using a humidifier, position it lower than you, and at the same level or lower than the VPAP III
Note: You must activate the humidifier option in the menus if you are using a HumidAire or Passover humidifier.
Attaching a HumidAire 2i Humidifier
Please refer to the illustrations in section E of the illustration sheet.
The HumidAire 2i attaches to the front of the VPAP III
Attaching a HumidAire 2iC Humidifier
Please refer to the illustrations in section F of the illustration sheet.
The HumidAire 2iC attaches to the front of a VPAP III
Attaching a HumidAire Humidifier
Please refer to the illustrations in section G of the illustration sheet.
Medium size (52 cm) air tubing is a necessary accessory for connecting the VPAP III
8