ResMed III ST-A user manual Using the LCD Screen and Keypad, LEDs

WARNING

! Make sure that the power cord and plug are in good condition and the equipment is not damaged.

7. Navigate to the humidifier setting (if available) in the VPAP III ST-A menu and select "PASSOVER". See “How to Use the Detailed Menu (if enabled by your clinician)” on page 20.

The VPAP III ST-A is now ready for use with the ResMed Passover. To start treatment, see “Starting Treatment” on page 13.

Using the LCD Screen and Keypad

The control panel of the VPAP III ST-A includes an LCD screen, LEDs and keypad.

LCD screen

QuickView

Left key (green)

Start/Stop

LEDs

Right key (red)

Alarm Mute

Up/down key

LCD Screen

The LCD screen displays the menus, treatment screens and alarm conditions.

To assist you in adjusting the VPAP III ST-A, the keypad and LCD are equipped with a backlight. The LCD backlight comes on when the device is turned on or when you press a key, and turns off after two minutes.

LEDs

The LEDs display the status of the VPAP III ST-A when active.

Green/Red

Yellow

The Green LED may be on during treatment, if enabled by your clinician. The Yellow or Red LEDs are on during an alarm condition.

10