Revolabs 10-FLX2-020-POTS manual Charging Components during a Call, Conference Call, Call Waiting

Conference Call

1.Press the „Enter‟ key to access the Active Call Menu and select „Conference‟.

2.Create the second call by selecting Dialer, Contacts, or Recent.

3.Initiate the second call.

4.After the second call has been established, merge the two calls by pressing the green „Call‟ button again.

Call Waiting

1.While a call is active and the FLX2 System receives a second call, the Speaker or Dialer will play the call waiting indication tone.

2.If available, the FLX Dialer displays the incoming caller number and name.

3.The FLX Dialer presents the user with the option to

„Answer‟ the call.

4.If no action is taken and the second call aborts, the FLX Dialer will show the previous Active call screen again.

5.When answering the second call, the first call is put on hold. Use the green „Call‟ button to resume the first call, ending the second.

NOTE: When using the red ‘End Call’ button while another caller is on hold, that caller will remain on-hold in the telephone network. The FLX2 Conference Phone will not be able to retrieve that call.

Charging Components during a Call

Each system component will respond differently when placed in or out of the charger during an active telephone call. The following is a description of what can be expected.

Dialer

When the Dialer is placed into the Charger Base during a call in „speaker mode‟, the call will not be affected and the Dialer will enter its charging mode.

When the Dialer is placed into the Charger Base during a „handset mode‟ call, the call will end and the Dialer will enter its charging mode.

22