Answering an Incoming Telephone Call
1.When the FLX2 System identifies an incoming call, it will play the ring tone through the FLX Speaker. If the Dialer is not in the Charger Base it will play a ring tone, too.
2.If your phone line supports caller ID, and the caller has not suppressed their caller ID information, the FLX Dialer will display the caller ID information for the incoming call.
3.A call can be answered in one of three fashions.
a.Press the Green „Call‟ button or the „Answer‟ key on the FLX Dialer.
b.Remove a Microphone from the charger.
c.Press the mute/unmute button on a Microphone that is already out of the charger.
NOTE: If there is either no Speaker active or no Microphones outside the Charger Base when the incoming call is answered from the FLX Dialer, the call will default to ‘handset mode’ and will remain in ‘handset mode’. The call can only be switched to ‘speaker mode’ if the speaker is switched on. If the call is switched to speaker mode while all microphones are in the charger base the microphones will have to be unmuted manually.
Ignoring an Incoming Telephone Call
1.When the FLX2 System identifies an incoming call, it will play the ring tone through the FLX Speaker.
2.The FLX Dialer will display the caller ID information for the incoming call.
3.A call can be ignored in one of two fashions.
a.Press the Red „End Call‟ button on the FLX
Dialer.
b.Press the „Ignore‟ key on the FLX Dialer.
Note: Once the user ignores the call, the system will cease to ring, but the option to answer is available until the caller disconnects.
19
