Control Panel

Display

The display panel shows machine status, error messages, and function menus.

Important

1

A force or impact of more than 30 N (about 3 kgf) will damage the display. The copy display is set as the default screen when the machine is turned on.

When you select or specify an item on the display, it is highlighted like .

Reading the Display and Using Keys

This section explains how to read the display and use the Selection keys.

1

1.Selection keys

Correspond to items at the bottom line on the display.

Example: The Copy display

When the instruction “press [100%]” appears in this manual, press the left selection key.

When the instruction “press [R/E]” ap- pears in this manual, press the centre selection key.

When the instruction “press [Auto R/E]” appears in this manual, press the right selection key.

2.{Cancel} key

Press to cancel an operation or return to the previous display.

4

Cancel OK

2 3 AAI015S

3.{OK} key

Press to set a selected item or an entered numeric value.

4.Scroll keys

Press to move the cursor in each direc- tion, step by step.

When the {U}, {T}, {W}, or {V} key appears in this manual, press the scroll key of the same direction.

17