User Tools (System Settings)

Settings You Can Change with User Tools

Reference

To access User Tools, see p.26 “Accessing User Tools (System Settings)”.

General Features

❖Panel Tone

3

The beeper (key tone) sounds when a key is pressed.

 

Note

❒Default: On

❖Copy Count Display

The copy counter can be set to show the number of copies made (count up), or the number of copies yet to be made (count down).

Note

❒Default: Up (count up)

❖Function Priority

You can specify the mode to be displayed immediately after the operation switch is turned on, or when System Reset mode is turned on.

Note

❒Default: Copier

❖Print Priority

Set the print priority for each mode.

Reference

p.21 “Multi-Access”

Note

❒Default: Display mode

❒When [Interleave] is selected, the current print job will be interrupted after a maximum of five sheets.

❒When the optional Internal tray 2 is installed on the machine, you can spec- ify an output tray for document. For details about how to specify an output tray for each function, see the following sections:

•p.29 “Output: Copier (copier)”

•p.29 “Output: Facsimile (facsimile)”

•p.29 “Output: Printer (printer)”

28