
User Tools (System Settings)
Accessing User Tools (System Settings)
This section is for key operators in charge of this machine.
User Tools allow you to change or set defaults.
Note
❒Operations for system settings dif-
fer from normal operations. Al-
3 ways quit User Tools when you have finished. See p.27 “Quitting User Tools”.
❒Any changes you make with User Tools remain in effect even if the main power switch or operation switch is turned off, or the {Clear Modes} key is pressed.
Changing Default Settings
Note
❒If a key operator code is already set, the key operator code entry display appears. Enter the key op- erator code, and then press the {OK} key. See p.34 “Key Operator Code”.
A Press the {User Tools/Counter} key.
| User Tools/ |
| Clear | |
| Counter |
| Modes | |
Hook Dial |
|
| Clear/Stop | |
|
|
| ||
|
| ABC | DEF | |
ause/ | GHI | JKL | MNO | |
Redial | ||||
|
| Start | ||
|
|
| ||
|
|
| AAH027S |
B Select [System Settings] using {U} or {T}, and then press the {OK} key.
C Select the menu using {U} or {T}, and then press the {OK} key.
Reference
p.23 “User Tools Menu (System Settings)”.
D Select the item using {U} or {T}, and then press the {OK} key.
E Change settings by following instructions on the display, and then press the {OK} key.
Note
❒To cancel changes made to set- tings and return to the initial display, press the {User Tools/ Counter} key.
26