Laser Facsimile

Parameter

Signification

 

 

 

 

79 - Toner

This parameter helps you manage

Management

the consumable. When set to WITH

 

[0-10%], you can only replace the

 

toner cartridge when the toner has

 

reached the threshold.

 

If ever you need to replace the

 

toner cartridge before the toner

 

near end, set the parameter to

 

WITH [0-100%] and proceed with

 

the toner cartridge replacement

 

(see chapter Maintenance, page

 

50).

 

Disabling the toner management

 

(parameter set to WITHOUT) is

 

strongly not recommended as you

 

may loose faxes and spill toner in

 

your print mechanism. When set to

 

WITHOUT, the screen displays

 

TONER ? %.

 

 

80 - Toner save

Makes printing lighter to save toner

 

cartridge ink.

 

 

91 - Timeout error

Inactivity time-out before document

 

being printed is deleted following a

 

print error in PC print mode.

 

 

92 - Wait timeout

Wait time-out for data from PC

 

before the task is deleted in PC

 

print.

93 - Replace format Page format change. This parameter allows you to print a LETTER format document on A4 pages using the LETTER/A4 setting.

Printing the functions guide

Important

The printing is not possible on A5
paper format.

 

 

 

 

51 - PRINT / FUNCTIONS LIST

1 Press on

and enter 51 with the digital keypad.

The printing of the functions guide starts.

Printing the logs

The printing is not possible on A5 Important paper format.

The incoming and outgoing logs list the last 30 transmissions (incoming and outgoing) made by your machine.

An automatic print out will take place after every 30 transmissions. However, you may request a print out at any time.

Each log (incoming or outgoing) contains a table with the following information:

• date and time of the incoming or outgoing document,

Parameters/Setup

 

not answer)

 

subscriber’s number,

 

• transmission mode (Normal, Fine, SFine or Photo),

 

• number of pages sent or received,

 

call duration,

 

 

• incoming or outgoing results: noted CORRECT if

 

 

properly transmitted,

 

 

or

 

 

 

information codes for special calls (polling, manual

 

 

subscribers, etc.)

 

• reason for call error (example: your subscriber does

 

To print the logs:

 

5 -

 

 

52 - PRINT / LOGS

 

 

1 Press on

and enter 52 with the digital keypad.

 

 

The printing of the logs starts.

 

The incoming and outgoing logs are printed on the same page.

Print the list of setups

The printing is not possible on A5 Important paper format.

To print the list of setups:

54 - PRINT / SETUP

1 Press on , enter 54 with the digital keypad. The printing of the list of setups starts.

Lock the machine

This function prevents non-authorized people from accessing the machine. An access code will be required every time someone wants to use the device. After each use, the device will lock automatically.

Before that you have to enter a lock code.

811 - ADVANCED FCT / LOCK / LOCKING CODE

1 Press on , enter 811 with the digital keyboard.

2Enter your lock code (4 digits) with the keyboard, confirm with OK.

If a code is already registered, enter Important the old code before typing the new

one.

3

Enter again your lock code (4

digits) with the

 

keyboard, confirm with OK.

 

4

Quit this menu by pressing the

button.

- 30 -