Total Length (in feet)

300 Compact Pipe and Bolt Threading Machine

General Safety Information

WARNING! Read and understand all instructions. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious personal injury.

SAVE THESE INSTRUCTIONS!

Work Area

Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.

Do not operate tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Tools create sparks which may ignite the dust or fumes.

Keep by-standers, children, and visitors away while operating a tool. Distractions can cause you to lose control.

Keep floors dry and free of slippery materials such as oil. Slippery floors invite accidents.

Guard or barricade the area when work piece extends beyond machine. A guard or barricade that provides a minimum of three (3) feet clearance around the work piece will reduce the risk of entan- glement.

Electrical Safety

Grounded tools must be plugged into an outlet, properly installed and grounded in accordance with all codes and ordinances. Never remove the grounding prong or modify the plug in any way. Do not use any adapter plugs. Check with a qual- ified electrician if you are in doubt as to whether the outlet is properly grounded. If the tools should electrically malfunction or break down, grounding pro- vides a low resistance path to carry electricity away from the user.

Cover of

grounded outlet box

Grounding prong

Grounding prong

Avoid body contact with grounded surfaces. There is an increased risk of electrical shock if your body is grounded.

Do not expose electrical tools to rain or wet con- ditions. Water entering a tool will increase the risk of electrical shock.

Do not abuse cord. Never use the cord to pull the plug from an outlet. Keep cord away from heat, oil, sharp edges or moving parts. Replace damaged cords immediately. Damaged cords increase the risk of electrical shock.

When operating a tool outside, use an outdoor extension cord marked “W-A” or “W”. These cords are rated for outdoor use and reduce the risk of elec- trical shock.

Use only three-wire extension cords which have three-prong grounding plugs and three-pole recep- tacles which accept the tool’s plug. Use of other extension cords will not ground the tool and increase the risk of electrical shock.

Use proper extension cords. (See chart.) Insufficient conductor size will cause excessive voltage drop and loss of power.

Minimum Wire Gauge for Extension Cord

Nameplate

Amps

 

 

0 – 25

26 – 50

51 – 100

0

– 6

18 AWG

16 AWG

16 AWG

6

– 10

18 AWG

16 AWG

14 AWG

10

– 12

16 AWG

16 AWG

14 AWG

12

– 16

14 AWG

12 AWG

NOT RECOMMENDED

Keep all electric connections dry and off the ground. Do not touch plugs or tool with wet hands. Reduces the risk of electrical shock.

Personal Safety

Stay alert, watch what you are doing and use com- mon sense when operating a power tool. Do not use tool while tired or under the influence of drugs, alcohol, or medications. A moment of inattention while operating power tools may result in serious per- sonal injury.

Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts.

Avoid accidental starting. Be sure switch is OFF before plugging in. Plugging tools in that have the switch ON invites accidents.

Remove adjusting keys before turning the tool ON. A wrench or a key that is left attached to a rotating part of the tool may result in personal injury.

Do not overreach. Keep proper footing and bal- ance at all times. Proper footing and balance enables better control of the tool in unexpected situations.

2

Ridge Tool Company

Page 4
Image 4
RIDGID 300 manual General Safety Information, Work Area, Electrical Safety, Personal Safety

300 specifications

The RIDGID 300 is a highly regarded threading machine amongst plumbers and contractors, known for its durability, performance, and innovation in pipe threading. Designed for high-volume operations, this versatile tool can handle a wide range of pipe sizes, making it an indispensable asset in various plumbing projects.

One of the main features of the RIDGID 300 is its robust construction. Built to withstand rigorous use in demanding environments, the machine boasts a heavy-duty frame and components that contribute to its longevity. The compact design allows for portability, making it easy to transport to job sites, while its solid base provides stability during operation.

The RIDGID 300 employs advanced technologies that enhance its efficiency and performance. The machine is equipped with a powerful electric motor that delivers consistent and reliable performance, enabling users to complete threading tasks quickly and effectively. A unique gear drive system allows for smooth operation, reducing wear and tear on the equipment while ensuring precision in threading.

Another notable characteristic of the RIDGID 300 is its ability to accommodate various pipe materials. The machine is designed to handle iron, steel, and other common materials, making it a flexible choice for different applications. Additionally, it features a quick-change die head, enabling operators to switch pipe sizes rapidly, significantly increasing productivity on the job site.

The RIDGID 300 includes thoughtful safety features that help protect users during operation. Its integrated safety features reduce the risk of injury, allowing operators to focus on their work with confidence. Furthermore, the machine’s maintenance-friendly design allows for easy access to components, ensuring that routine servicing and repairs can be conducted with minimal downtime.

The versatility and adaptability of the RIDGID 300 make it suited for a variety of threading applications. Whether used in residential, commercial, or industrial environments, this threading machine consistently delivers outstanding results, earning it a reputation as a go-to tool for professionals in the plumbing industry. Its combination of power, durability, and thoughtful design elements ensure that the RIDGID 300 remains an essential piece of equipment for threading tasks, keeping pipelines secure and leak-free.