RIDGID BS14002 manual Mounting Blade Hangers, Mounting the Pulley Cover

ASSEMBLY

MOUNTING BLADE HANGERS

See Figure 18.

nLocate the following items.

4 pan head screws, (M4 x 0.7-10)

4 hex nuts, (M4 x 0.7)

4 lock washers, (M4)

2 blade hangers

1 pulley cover

nAlign blade hangers over the holes on opposite sides of the pulley cover. Make sure they are pointing in opposite directions. Fasten blade hangers using pan head screws, lock washers, and hex nuts, as shown.

MOUNTING THE PULLEY COVER

See Figure 19.

nLocate the following items.

3 pan head screws, (M5 x 0.8-12)

6 washers, (M5)

3 hex nuts, (M5)

nPlace pulley cover over both pulleys. Align holes in the pulley cover to holes in the leg stand. Fasten pulley cover to leg stand using pan head screws, washers, and hex nuts, as shown.

PULLEY COVER

BLADE

HANGERS

PAN HEAD SCREWS

HEX NUTS

LOCK WASHERS

Fig. 18

PAN HEAD

SCREWS

WASHER HEX NUTS Fig. 19

18