OPERATION
TILTING THE TABLE
See Figure 38.
nLoosen the lock knob slightly.
nTurn the angle adjustment knob, tilt the saw table toward the front of the saw housing until it reaches the desired angle.
nUsing the scale indicator, check angle markings.
nRetighten the lock knob to hold saw table securely in place.
TABLE STOP
BOLT
SAW TABLE
CIRCLE CUTTING |
|
| |
See Figure 39. |
|
| |
n Adjust the upper guides to vertically just clear the |
| UL | |
|
| P L | |
workpiece. |
|
| |
n Use both hands while feeding the work into the blade. | JAM NUT |
| |
Hold the workpiece firmly against the table. Use gentle | LOCK KNOBS | SCALE | |
pressure, and do not force the work, but allow the blade | |||
| |||
|
| ||
to cut. |
|
|
nThe smallest diameter that can be cut out is determined by the width of the blade. For example, a 1/4 in. (6 mm) wide blade will cut a minimum diameter of approximately
CIRCLE CUTTING
10°
0°
45°
15° | 30° |
|
SCALE
INDICATOR
Fig. 38
CIRCLE DIA.
1/2"D | 1"D | 2"D | 4"D | 7"D | |
1/8" | 1/16" | 1/4" | 3/8" | 1/2" | 3/4" |
BLADE SIZE
Fig. 39
27
