operation

Starting the engine

See Figure 20.

NOTE:  If location of generator is not level, the unit may not start or may shut down during operation.

Unplug all loads from the generator.

Turn the fuel valve to the ON position.

Move the choke lever right to the START position.

NOTE:  If engine is warm or the temperature is above

50˚F, move the choke lever left to the RUN position.

Turn the engine switch key to “ON.”

Turn the engine switch key to “START” or pull the recoil starting grip until the engine runs (a maximum of 6 times).

NOTE:  Do not allow the grip to snap back after starting; return it gently to its original place.

NOTE: The battery is shipped in a low charge condition and may require charging before the generator can be started using only the switch key. The generator can be started by pulling the recoil starter. Once the generator is started, the battery will charge as the unit runs.

Allow the engine to run for 30 seconds, then move the choke lever left to the RUN position.

Stopping the engine

See Figure 20.

To stop the engine under normal operating conditions:

Remove any load from the generator.

Turn the switch key to “OFF”or press and hold the off switch until the engine stops.

NOTE: The generator can be stopped by turning the switch key to off or by pressing and holding the off switch on the fixed control panel.

Turn the fuel valve to the OFF position.

NOTE: If it is necessary to shut the engine off immediately, either engine switch may be used if the removable control panel is connected to the unit. The off switch on the station- ary control panel can be used as the primary engine OFF

switch.

16 — English

Page 15 Page 17
Page 16
Image 16
RIDGID RD80011, RD8000 Starting the engine, Stopping the engine, To stop the engine under normal operating conditions
Page 15 Page 17

RD80011, RD8000 specifications

The RIDGID RD8000 and RD80011 represent a significant advancement in the world of underground utility locating. These versatile tools are designed to help professionals accurately detect and trace buried utilities, ensuring safe and efficient excavation and construction processes.

Both models are equipped with advanced signal processing technologies that enhance their ability to locate utilities, even in challenging environments. The RD8000 is renowned for its range of frequencies—typically offering up to five different transmission frequencies, allowing users to locate a variety of utility types including electric, gas, water, and telecommunications lines. This frequency versatility means that users can effectively cater to a wide spectrum of application needs, from residential projects to large-scale infrastructure work.

The RD80011 variant enhances these capabilities with added features aimed at improving user experience and precision. One standout feature is the built-in GPS technology, which allows for real-time mapping and locating of utilities, providing users with the ability to track locations directly on their devices. This integration streamlines the process of recording and reporting utility locations, fostering efficient workflow and reducing the risk of errors in documentation.

Additionally, both models boast an ergonomic design, featuring a lightweight build and intuitive controls that make them user-friendly. The display screen is bright and easy to read, featuring visual indicators that help convey critical information at a glance. The RD8000 and RD80011 utilize a rechargeable battery that ensures long-lasting power, giving users the confidence to tackle extended projects without the need to frequently replace batteries.

Another valuable characteristic is the built-in earphone jack, allowing for enhanced audio feedback and communication in noisy environments. Users can listen for specific tones corresponding to different utilities, which can aid in pinpointing the location with greater accuracy.

These RIDGID models also include advanced interference suppression technologies to minimize signal distortion from other nearby utilities, ensuring users receive clear and accurate data. This feature is particularly vital in complex urban settings where multiple utilities coexist in close proximity.

In summary, both the RIDGID RD8000 and RD80011 are designed with professional utility locators in mind, integrating advanced technologies and features that enhance detection capabilities, improve ease of use, and contribute to safer excavation practices.
Top Page Image Contents