Radio Data Interface (RDI) output - DAB
Your radio is equipped with an RDI optical output socket (TosLink) which can be used to connect your radio to an external data decoder.
The default setting for the RDI optical output is Off (so as to conserve battery life). To switch on the Digital Output proceed as follows:-
1.Press the Setup button to enter Setup menu.
2.Rotate the Tuning control until the DAB section appears between the two black lines on the display. Press in and release the Tuning control to confirm the selection
3.Rotate the Tuning control until the More... line is highlighted in the display. Press in and release the Tuning control to confirm the selection
4.Rotate the Tuning control until the RDI Enable line is highlighted in the display.
5.Press in and release the Tuning control to enter adjustment mode.
6.Rotate the Tuning control to select required setting (Yes or No) Press in and release the Tuning control to confirm the selection.
7.Repeatedly press and release the Setup button until the display returns to show normal station mode.
1
TUNING
Press
to select
2
TUNING
Press
to select
4
AUTO
|
|
| Buzzer Alarm |
| Radio Alarm |
| Record Timer |
| AUTO |
|
|
| Record Timer |
| Clock |
| DAB |
| Display |
| Sleep |
| AUTO |
| DAB |
Audio 2 | ... |
Optical output | Yes |
RDI Enable | No |
Storage | On |
Storage Control | ... |
Service Status | ... |
AUTO
BBC 7
The Brighton Mystery Journalist Polly solves murder mysteries with the help of a mystery Man in a tea room
7
If you need any further advice, please call our Technical Helpline on :-
11:1018-May-2004
020 8758 0338 | 30 |
|
