22
Using A-PRO Editor
A-PRO Editor is software that lets you create control maps (p. 21) for the A-PRO series
on your computer, and make settings for the keyboard. The graphical screen makes it
easy to edit the values (settings).
fig.editor-mainwindow-e+.eps_39
The A-PRO has a total of 44 controllers: [B1]–[B4], [R1]–[R9], [L1]–[L9], [S1]–[S9], [A1]–
[A8], HOLD (P1), EXPRESSION (P2), BENDER, MODULATION, and AFTERTOUCH. You can
freely assign any MIDI message to be controlled by each controller.
The 44 message assignments for these controllers are collectively called a “control
map.”
Simple assignments of MIDI messages can be made on the A-PRO keyboard itself
without using the editor software. However, A-PRO Editor also allows you to transfer
control map data in and out of the A-PRO keyboard, to edit control map data, and also
to save or load control map settings as SMF format data.
➝ “Assigning a MIDI Message on the A-PRO Keyboard” (p. 48)
1Insert the included A-PRO CD-ROM into your CD-ROM drive.
2On the CD-ROM, open the [EDITOR] folder and double-click [SETUP]
to start the installer.
3The screen “Welcome to the InstallShield Wizard for A-PRO Editor
Setup” will appear. Click [Next].
4When the “Please Read” screen appears, read the contents, and if
you consent, click [Yes].
You cannot install A-PRO Editor unless you consent to the terms.
5A dialog box will allow you to specify the installation location.
Simply click [Next].
6Verify the contents of the “Confirmation of installation” screen, and
then click [Next].
Copying of the files will begin.
7When copying is completed, click [Finish].
This completes installation of the A-PRO Editor.
1Insert the included A-PRO CD-ROM into your CD-ROM drive.
2From the CD-ROM’s [Editor] folder, drag the [A-PRO Editor] folder
and drop it into your Mac’s [Applications] folder to copy it.
This completes installation of the A-PRO Editor.

Installing A-PRO Editor

Windows Users

Mac OS X Users

A-300_500_800C_e.book 22 ページ ２０１０年２月２２日　月曜日　午後９時１３分