68
System Settings (EDIT Mode)
Here you can specify which control map is to be called up when the A-PRO is powered up.
1Simultaneously press the [ACT] button and the [ ] button.
2Use the [VALUE] knob to select “SYSTEM SETTING,” and press the
[ENTER] button.
fig.lcd-STARTUPMEMORY.eps
3Use the [VALUE] knob to select
“STARTUP MEMORY,” and press the
[ENTER] button.
fig.lcd-STARTUPMEMORY1.eps
4Use the [VALUE] knob to choose
“CTL MAP 0” or “LAST ACC MAP.”
5Press the [ENTER] button.
Here you can specify the function that is to be controlled by the [VALUE] knob when
the cursor is located at USER ASSIGN.
1Simultaneously press the [ACT] button and the [ ] button.
2Use the [VALUE] knob to select “FUNCTION,” and press the [ENTER]
button.
fig.lcd-FUNCKEYVELO.eps
3Use the [VALUE] knob to choose the
parameter that will be assigned to
the [VALUE] knob.
4Press the [ENTER] button.
5If you selected “CONTROL CHANGE” as the parameter, use the
[VALUE] knob to specify the desired control change number.
6Press the [ENTER] button.
Control Map Settings

STARTUP MEMORY

Setting Explanation
CTL MAP 0 Control map number 0 will be selected at start-up.
LAST ACC MAP The control map that was last selected and saved will be called up
upon start-up.
[VALUE] knob Settings

FUNCTION

Value Setting Explanation Value range
1KEY VELOCITY
Fixes the key velocity value.
The A-PRO detects the force with
which you play the keyboard, and
transmits this as the velocity value;
however, this setting causes a fixed
velocity to be transmitted regard-
less of how strongly you strike the
keyboard. Use this if you don’t want
your playing dynamics to have an
effect.
TOUCH, 1–127
*If you choose
TOUCH, the
transmitted
velocity value
will depend
on your key-
board playing
strength.
2BANK LSB Specifies the bank select LSB
(CC#32). 0–127
3BANK MSB Specifies the bank select MSB
(CC#00). 0–127
4CONTROL
CHANGE Specifies a control change. 0–127
5TEMPO Specifies the MIDI CLOCK tempo. 20–250
A-300_500_800C_e.book 68 ページ ２０１０年２月２２日　月曜日　午後９時１３分