52
Assigning MIDI Messages (EDIT Mode)
Here’s how to assign a program change message to a controller.
1Press the [ACT] button and [ ] button simultaneously.
2Slightly move the controller to which you want to assign a control
change message.
If the controller is a button, press it.
The number of the selected controller will blink in the display.
3Verify that the display, and press the [ENTER] button.
fig.lcd-programchange.eps
4Turn the [VALUE] knob until
“PROGRAM CHANGE” appears in the
display.
fig.lcd-midichannel.eps
5Press the [ENTER] button.
The display will indicate the currently
specified MIDI transmit channel.
6Use the [VALUE] knob to specify the desired MIDI transmit channel.
fig.lcd-pcnumber.eps
7Press the [ENTER] button.
The display will indicate the currently
specified program change number.
8Use the [VALUE] knob to select the desired program change
number.
9Press the [ENTER] button.
If you’ve assigned this message to [R1]–[R9], [S1]–[S9], or EXPRESSION (P2), moving
the controller to the maximum position will transmit the program change message
you specified.
Program Change Assignment
MIDI transmit channel BANK MSB BANK LSB Program number Port
1–16 X X 0–127 (00–7FH) PORT1 (fixed)
A-300_500_800C_e.book 52 ページ ２０１０年２月２２日　月曜日　午後９時１３分