50
Assigning MIDI Messages (EDIT Mode)
Here’s how to assign an aftertouch message to a controller.
A-PRO Editor lets you assign aftertouch messages for individual notes (Polyphonic Key Pressure) as well as channel aftertouch (Channel Pressure) (p. 34).
1Press the [ACT] button and [ ] button simultaneously.
2Slightly move the controller to which you want to assign aftertouch.
If the controller is a button, press it.
The number of the selected controller will blink in the display.
3Verify that the display, and press the [ENTER] button.
fig.lcd-aftertouch.eps
4Turn the [VALUE] knob until
“AFTERTOUCH” appears in the
display.
fig.lcd-midichannel.eps
5Press the [ENTER] button.
The display will indicate the currently
specified MIDI transmit channel.
6Use the [VALUE] knob to specify the desired MIDI transmit channel.
7Press the [ENTER] button.
8Specify the “Button mode setting” (p. 55) as appropriate for the
controller type.
Aftertouch Assignment
MIDI transmit channel Value range Port Button mode
1–16 0–127 (00–7FH) PORT1 (fixed) UNLATCH, LATCH, INCREASE
A-300_500_800C_e.book 50 ページ ２０１０年２月２２日　月曜日　午後９時１３分