31
Using A-PRO Editor
If you wan t to edit the c ontr ol ma p set ting s of the A-PRO keyboard in A-PRO Editor, use
the following procedure to receive control map data from the A-PRO keyboard so that
it can be edited.
fig..editor-rcv1.eps
1From the numbers displayed in the
[Control Map] dropdown list, select
the number of the control map that
you want to edit.
2Click [Receive].
fig.editor-rev3-e.eps_50
3In the confirmation dialog box, click
[Continue].
fig.editor-trans4-e.eps_40
4A reception progress dialog box will
appear.
When the dialog box disappears, reception
has been completed.
If you want to use the control map settings created in A-PRO Editor on the A-PRO
keyboard, use the following procedure to transmit the edited control map to the A-PRO
keyboard.
fig.editor-trans1.eps
1In the [Control Map] dropdown list,
specify the number at which you want
to save your control map.
2Click [Transmit].
fig.editor-trans3-e.eps_50
3In the confirmation dialog box, click
[Continue].
fig.editor-trans4-e.eps_40
4A transmission progress dialog box
will appear.
When the dialog box disappears, transmission
has been completed.
Receiving a Control Map from the A-PRO Transmitting a Control Map to the A-PRO
A-300_500_800C_e.book 31 ページ ２０１０年２月２２日　月曜日　午後９時１３分