32
Using A-PRO Editor
Control map settings you’ve edited in A-PRO Editor can not only be transferred directly
between the A-PRO keyboard and your computer, they can also be saved on your
computer as an SMF format file.
To save an SMF file, proceed as follows.
1Choose the [File] menu command [Save As].
If you want to overwrite the most recently opened file, choose the [File] menu
command [Save].
2Enter a file name and click [Save].
Control map data that was saved on your computer in SMF format can be loaded into
A-PRO Editor.
To load an SMF file, proceed as follows.
1Choose the [File] menu command [Open].
2Specify the SMF file that you want to load, and click [Open].
* An SMF file that does not contain A-PRO control map data cannot be opened. The
SMF must contain settings for all controllers.
* The contents of t he Name fie ld can be lo aded only f rom an SMF that was sa ved by
A-PRO Editor.
* It is not possible to load control maps from the PCR-300/500/800 or memory sets
from an earlier PCR series unit.
Saving a Control Map on Your Computer Loading a Control Map that was Saved on Your Computer
A-300_500_800C_e.book 32 ページ ２０１０年２月２２日　月曜日　午後９時１３分