69
System Settings (EDIT Mode)
Turn this On when using certain applications (such as Pro Tools LE). If this is On, the
message “90 00 7F” will be transmitted to “A-PRO 2” at intervals of approximately 500
ms.
1Simultaneously press the [ACT] button and the [ ] button.
2Use the [VALUE] knob to select “SYSTEM SETTING,” and press the
[ENTER] button.
fig.lcd-HACTVTY.eps
3Use the [VALUE] knob to choose
“H-ACTVTY ON/OFF,” and press the
[ENTER] button.
fig.lcd-HACTVTY1.eps
4Use the [VALUE] knob to specify
either “ON” or “OFF.”
5Press the [ENTER] button.
This specifies the function of the [HOLD] button.
1Simultaneously press the [ACT] button and the [ ] button.
2Use the [VALUE] knob to select “SYSTEM SETTING,” and press the
[ENTER] button.
fig.lcd-L9FUNC.eps
3Use the [VALUE] knob to choose “L9
FUNCTION,” and press the [ENTER]
button.
fig.lcd-L9FUNC1.eps
4Use the [VALUE] knob to specify the
function of [HOLD] button.
5Press the [ENTER] button.
Other Settings

H-ACTIVITY ON/OFF L9 FUNCTION

Value Setting Explanation
1L9 Any desired MIDI message can be assigned to the button.
2HOLD The button will allow the sound to continue even after you
take your hand off the pad.
3 VLINK The button will operate as a V-LINK ON/OFF button.
A-300_500_800C_e.book 69 ページ ２０１０年２月２２日　月曜日　午後９時１３分