57
System Settings (EDIT Mode)

This section explains how to make system settings for the A-PRO.

System settings include the following items.

Category Item Contents Factory setting See page
LCD LCD CONTRAST Adjusts the LCD contrast. 5p. 59
Keyboard
KEYBOARD VELOCITY CURVE Specifies how velocity will change in response to keyboard dynamics (velocity curve). 1-MEDIUM p. 60
KEYBOARD AFTERTOUCH CURVE Specifies how keyboard aftertouch will respond. 1p. 61
KEYBOARD PORT SET Specifies the port from which the keyboard and bender lever will transmit performance data. PORT 1 p. 61
KEYBOARD ACTIVE PART Specifies the part(s) that will be affected by the [VALUE] knob, BENDER, MODULATION, AFTERTOUCH,
HOLD, and EXPRESSION controllers. UPPER p. 62
TRANSPOSE Specifies how the keyboard will be transposed when you turn on the [TRANSPOSE] button. 2p. 62
SHIFT KEY LATCH Specifies whether the [SHIFT] button will operate in Unlatched mode (turning on whe n pr ess ed, tur nin g of f
when released) or in Latched mode (alternately turning on/off each time it is pressed). UNLATCH p. 62
Pads
PAD VELOCITY CURVE Specifies how the velocity value transmitted when you strike a pad controller [A1]–[A8] will correspond to
the force with which you strike (velocity curve). 1p. 63
PAD AFTERTOUCH CURVE Specifies how the pad controllers [A1]–[A8] will respond to aftertouch. 1p. 63
Clock
MIDI CLOCK ON/OFF Specifies whether MIDI CLOCK will be transmitted. OFF p. 64
MIDI CLOCK DEFAULT TEMPO Specifies the initial MIDI CLOCK value when “MIDI CLOCK ON/OFF” is On. After the power is turned on, this
tempo will be output until you move the [VALUE] knob to which TEMPO is assigned. 120 p. 64
MIDI CLOCK OUTPUT PORT When “MIDI CLOCK ON/OFF” is On, this specifies the port from which MIDI CLOCK is transmitted. PORT 1 p. 64
USB ADVANCED DRIVER MODE Switches the driver mode. ON p. 65
MIDI
MIDI I/F SWITCH Specifies whether the MIDI connectors will be used as a MIDI interface. ON p. 66
MIDI MERGE DESTINATION Specifies the port that will be merged when the [MIDI MERGE] switch is On. PORT 1 p. 67
Control map STARTUP MEMORY Specifies which control map is to be called up when the power is turned on. CTL MAP 0 p. 68
Controller FUNCTION Specifies the parameter that will be transmitted by the [VALUE] knob. KEY VELOCITY p. 68
A-300_500_800C_e.book 57 ページ ２０１０年２月２２日　月曜日　午後９時１３分