101
Playing in Performance Mode

Here's how to select the parts whose patch or rhythm set will sound.
For each part, use the check box to specify whether that part will be
played from the keyboard; this is called the “keyboard switch.”

1.

From the Layer screen, Use [CURSOR] to move the cursor
to “KBD,” and press [INC] to add a check mark (

✔

) to
“KBD.”

When you play the keyboard, you will hear the current part and
the parts that have a check mark.

fig.08-008_50

If you don’t like the patch that is assigned to a part, it’s easy to
switch the patch.

Selecting from a list display

1.

Select the part whose sound you want to switch.

2.

Press [F1 (Patch List)].

The Patch List screen will appear.

fig.05-008_50

* To cancel, press [EXIT].

3.

Use or to select a patch.

If you press [F4 (Patch Categ)], the list will show the categories.
If you press [F5 (Patch)] or [F6 (Rhythm)], the list will show the
patch groups.

fig.05-009_50

To switch groups, press [F1 (

⇑

)] [F2 (

⇓

)].
By pressing [F7 (Preview)] you can audition a patch using a
preselected phrase appropriate for that type (category) of patch
(Phrase Preview).
4.
Press [F8 (Select)] to select the patch.

Selecting the Part that You want to

Sound (Keyboard Switch)

About the keyboard switch

Use the keyboard switch when you want to play multiple
sounds layered together (Layer) or assign different sounds to
different regions of the keyboard (Split). Conversely, you can
turn off all keyboard switches when you are creating data, etc.

Selecting the Sound for a Part

Fantom-X678_r_e.book 101 ページ ２００５年５月１２日　木曜日　午後４時４０分