Roland Fantom-X6, Fantom-X7, Fantom-X8 74: ENHANCER , DELAY, 75: CHORUS , , DELAY, 76: FLANGER , DELAY,

291
Effects List
74: ENHANCER → DELAY
fig.MFX-74
75: CHORUS → DELAY
fig.MFX-75
76: FLANGER → DELAY
fig.MFX-76
Parameter Value Description
Enhancer Sens # 0–127 Sensitivity of the enhancer
Enhancer Mix # 0–127 Level of the overtones gener-
ated by the enhancer
Delay Time 0–2600 ms, note Adjusts the delay time from
the direct sound until the de-
lay sound is heard.
Delay
Feedback # -98– +98 % Adjusts the proportion of the delay sound that is fed back
into the effect. Negative (-)
settings will invert the phase.
Delay HF Damp 200–8000 Hz,
BYPASS Adjusts the frequency above which sound fed back to the
effect will be cut. If you do not
want to cut the high frequen-
cies, set this parameter to BY-
PASS.
Delay Balance # D100:0W–D0:100W Adjusts the volume balance
between the sound that is sent
through the delay (W) and the
sound that is not sent through
the delay (D).
Level 0–127 Output Level
Parameter Value Description
Chorus Pre
Delay 0.0–100.0 ms Adjusts the delay time from the direct sound until the chorus
sound is heard.
Chorus Rate # 0.05–10.00 Hz, note Frequency of modulation
Chorus Depth 0–127 Depth of modulation
Chorus
Balance # D100:0W–D0:100W Volume balance between the di- rect sound (D) and the chorus
sound (W)
Delay Time 0–2600 ms, note Adjusts the delay time from the
direct sound until the delay
sound is heard.
Delay
Feedback # -98– +98 % Adjusts the proportion of the delay sound that is fed back into
the effect. Negative (-) settings
will invert the phase.
Delay HF
Damp 200–8000 Hz, BYPASS Adjusts the frequency above which sound fed back to the ef-
fect will be cut. If you do not
want to cut the high frequen-
cies, set this parameter to BY-
PASS.
Delay
Balance # D100:0W–D0:100W Adjusts the volume balance be- tween the sound that is sent
through the delay (W) and the
sound that is not sent through
the delay (D).
Level 0–127 Output Level
Feedback
Delay
L in
R in
L out
R out
Mix
Mix
Enhancer
Enhancer
Balance W
Balance W
Balance D
Balance D
Feedback
Delay
L in
R in
L out
R out
Balance W
Balance W
Balance D
Balance D
Chorus
Balance W
Balance W
Balance D
Balance D
Parameter Value Description
Flanger Pre
Delay 0.0–100.0 ms Adjusts the delay time from when the direct sound begins
until the flanger sound is
heard.
Flanger Rate # 0.05–10.00 Hz, note Frequency of modulation
Flanger Depth 0–127 Depth of modulation
Flanger
Feedback # -98– +98 % Adjusts the proportion of the flanger sound that is fed back
into the effect. Negative (-) set-
tings will invert the phase.
Flanger
Balance # D100:0W–D0:100W Volume balance between the direct sound (D) and the
flanger sound (W)
Delay Time 0–2600 ms, note Adjusts the delay time from
the direct sound until the delay
sound is heard.
Delay
Feedback # -98– +98 % Adjusts the proportion of the delay sound that is fed back
into the effect. Negative (-) set-
tings will invert the phase.
Delay HF
Damp 200–8000 Hz, BYPASS Adjusts the frequency above which sound fed back to the ef-
fect will be cut. If you do not
want to cut the high frequen-
cies, set this parameter to BY-
PASS.
Delay
Balance # D100:0W–D0:100W Adjusts the volume balance be- tween the sound that is sent
through the delay (W) and the
sound that is not sent through
the delay (D).
Level 0–127 Output Level
Feedback
Delay
L in
R in
L out
R out
Balance W
Balance W
Balance D
Balance D
Flanger
Balance W
Balance W
Balance D
Balance D
Feedback
Fantom-X678_r_e.book 291 ページ ２００５年５月１２日 木曜日 午後４時４０分