211
Adding Effects

Part Reverb Send Level

Sets the level of the signal sent to reverb for each part.

Value:

0–127

For the following parameters – , settings can be made
individually for three systems multi-effects (MFX1–MFX3).

MFX Type (Multi-Effects Type)

Use this parameter to select from among the 78 available multi-
effects. For details on multi-effects parameters, refer to

“Multi-
Effects Parameter”

(p. 270).

Value:

0 (Through)–78

MFX Output Level (Multi-Effects Output

Level)

Adjusts the volume of the sound that has passed through the
multi-effects.

Value:

0–127

MFX Chorus Send Level (Multi-Effects

Chorus Send Level)

Adjusts the amount of chorus for the sound that passes through
multi-effects. If you don’t want to add the Chorus effect, set it to
“0.”

Value:

0–127

MFX Reverb Send Level (Multi-Effects

Reverb Send Level)

Adjusts the amount of reverb for the sound that passes through
multi-effects. If you don’t want to add the Reverb effect, set it to
“0.”

Value:

0–127

MFX Output Assign (Multi-Effects Output

Assign)

Adjusts the output destination of the sound that has passed
through the multi-effects.

Value
A:

Output to the OUTPUT A (MIX) jacks in stereo.

B:

Output to the OUTPUT B jacks in stereo.

If the Mix/Parallel parameter is set to “MIX,” all sounds are
output from the OUTPUT A (MIX) jacks in stereo (p. 230).

For some settings of MFX Structure, the sound that passes
through the multi-effect will be sent to a different multi-effect,
and the MFX Output Assign setting will be ignored.

Chorus Type

Selects either chorus or delay.

Value
0 (Off):

Neither chorus or delay is used.

1 (Chorus):

Chorus is used.

2 (Delay):

Delay is used.

3 (GM2 Chorus):

General MIDI 2 chorus

Chorus Output Select

Specifies how the sound routed through chorus will be output.

Value
MAIN:

Output to the OUTPUT jacks in stereo.

REV:

Output to reverb in mono.

M+R:

Output to the OUTPUT jacks in stereo, and to reverb
in mono.

When set to “MAIN” or “M+R,” the OUTPUT jack from which
the sound is output is set in Chorus Output Assign ( ).

Chorus Level

Adjusts the volume of the sound that has passed through
chorus.

Value:

0–127

Chorus Output Assign

Selects the pair of OUTPUT jacks to which the chorus sound is
routed when Chorus Output Select ( ) is set to “MAIN” or
“M+R.”
Value
A:
Output to the OUTPUT A (MIX) jacks in stereo.
B:
Output to the OUTPUT B jacks in stereo.

When Chorus Output Select ( ) is set to “REV,” this setting
will have no effect.

If the Mix/Parallel parameter is set to “MIX,” all sounds are
output from the OUTPUT A (MIX) jacks in stereo (p. 230).
6
711
7
8
9
10
11
12
13
15
14
15
13
13
Fantom-X678_r_e.book 211 ページ ２００５年５月１２日　木曜日　午後４時４０分