248

Using a Memory Card

The Fantom-X features a PC card slot, allowing you to use not only
PC card type memory cards, but also other types of media, such as
CompactFlash and Smart Media, via the appropriate PC card
adaptor.
Make sure that the correct side of the card is facing upward, and
insert it into the Fantom-X's PC card slot. When you need to remove
the card, press the eject button located beside the card.

fig.31a-001

Patches, rhythm sets, performances, samples, and song data can be
written to the card. For details on the writing procedure, refer to the
explanation for the corresponding parameters.
The Fantom-X provides a PC card protector to prevent theft of the
memory card. To install the PC card protector, use the following
procedure.

1.

Use a screwdriver to remove both of the screws from the
bottom side of the PC CARD slot.

2.

Insert the memory card into the PC CARD card slot.

3.

Use the screws to fasten the PC card protector as shown
below.

fig.31a-002

Before Using the Memory

Card

Writing data to the card

Eject

memory

card

Installing the PC Card

Protector

PC card protector
Memory card
Fantom-X Rear Panel
Fantom-X678_r_e.book 248 ページ 2005年5月12日 木曜日 午後4時40分