183
Editing Songs

Range Min, Range Max

Specifies the range of note numbers to be quantized.
For example, if you want to quantize the range between C3 and C4,
set “Note Min” to “C3,” and set “Note Max” to “C4.”
You can also specify the key range by pressing keys on the
keyboard.
This function erases all the sequencer data inside the specified area.
As the erased data is replaced by rests, the original measures will
remain.

fig.19-011_50

For details on the settings, refer to

“Basic Operation for Track
Editing”

(p. 180)

Track / Pattern

Specifies the track(s) or pattern that is to be erased.

Value
ALL:

Phrase tracks 1–16, the beat track, and the tempo
track

TRK 1–TRK 16:

The specified phrase track

TEMPO:

Tempo track

PTN001–PTN100:

The specified pattern

Ch / Part

Selects the MIDI channel of the data to be erased.
When you want to erase all sequencer data, set this parameter to
“ALL.” To erase sequencer data of one specific MIDI channel only,
select that MIDI channel.

Value:

ALL, Ch1–Ch16
If you set the Track parameter to “TEMPO,” or if the Status
parameter is set to “System Exclusive,” “Tune Request” or “Pattern
Call,” the Channel parameter will not be available.

Measure, For (Edit Range)

Specifies the range of measures that are to be erased. If you set “For”
to “ALL,” all measures will be specified.

Status

Selects the type of data to be erased.

Value
ALL
NOTE
Poly Aftertouch
Control Change
Program Change
Channel Aftertouch
Pitch Bend
System Exclusive
Tune Request
Pattern Call

If the Track parameter is set to “TEMPO,” the Status parameter
will not be available.

Range Min, Range Max

If you have set the Status parameter to “NOTE,” “P.AFT,” “C.C,” or
“PROG,” specify the range. Set “Range Min” to the lowest value of
the range, and “Range Max” to the highest value of the range.

To erase all notes or polyphonic aftertouch data, set “Range
Min” to “C -1” and “Range Max” to “G9.” To erase C4, set
“Range Min” and “Range Max” to “C4.” To erase C3 through
C4, set “Range Min” to “C 3” and “Range Max” to “C4.”
• To erase all controller numbers, set “Range Min” to “0” and
“Range Max” to “127.” To erase all program numbers, set
“Range Min” to “1” and “Range Max” to “128.” To erase
number 4, set “Range Min” and “Range Max” to “4.” To erase
numbers 3 through 14, set “Range Min” to “3” and “Range
Max” to “14.”

Erasing Unwanted Performance

Data (Erase)

Preview Function

The Preview function allows you to hear how quantizing will
work while you are still setting Quantize parameters (before
you execute operation). This is called the Preview function. If
you modify parameter values during preview playback, the
next preview playback will include those latest value changes.
Try various parameter settings to find the one that works best.
Pattern Call events assigned to a phrase track or muted
phrase tracks cannot be previewed.
Pressing [PLAY] when the Track Edit (Quantize) window is
displayed selects Preview mode. The two measures from the
current location of the song will play back repeatedly. The
preview start location can also be specified by pressing [FWD]
or [BWD]. To exit Preview mode, press [STOP].
Fantom-X678_r_e.book 183 ページ ２００５年５月１２日　木曜日　午後４時４０分