2 Basic Operation

2 Basic Operation

2-1 Attach the Drain Bottle

The tube plug and the cap for the drain bottle will be needed if you must repackage the product. Please do not throw them away.

Detach the tube plug from the tube tips protruding

1 from the bottom surface of the right-hand side of the unit.

Tube

Tube plug

Pass the tube through the hole in the drain-bottle

2 mounting cap and align with the threaded hole. Tighten the included screws.

Drain-bottle cap

Remove the cap for the drain bottle and attach the drain bottle to the unit by screwing

3 it on in the direction of the arrow. Line up the threads on the drain bottle with the threads on the unit, and screw on the bottle without applying excessive force.

Leave this mounted unless transporting the main unit, or when it is full. Under normal use, only a small amount of ink should collect in this bottle.

Drain bottle

Dispose of ink in the drain bottle as described below.

Discard any ink that has collected in the drain bottle and cap the bottle securely.

If any ink gets on your hands or clothing, wash it off as soon as possible. Ink stains may become difficult to remove if allowed to stand.

1

Press the [POWER] key to switch off the power.

2

Remove the drain bottle

 

and attach the tube plug to

 

The POWER LED goes out

 

the tube tips instead.

Drain bottle

Tube plug

 

15