|
|
| 2 Basic Operation |
Power Off in Daily Operation |
|
| |
1 | If the SETUP LED is lighted, press the [SETUP] key. | 2 | Move the sheet loading lever toward the back of the |
Hold down for about 1 second. | unit and remove the material. | ||
The SETUP LED goes out | Sheet loading lever | ||
| |||
|
|
|
|
Press the [POWER] key to switch off the power.
3 The carriage moves to the standby position and the head is capped.
If the carriage is already at the standby position, no movement takes place.
The POWER LED goes out
Standby position
Carriage
When Not in Use for a Prolonged Period...
NOTICE | Do not switch off the main power with the printing head in an uncapped state (i.e., while the carriage is on the |
| platen). |
| If you leave the carriage uncapped for a long time, doing so may result in clogging of the printing head, making |
| it unusable. |
| Before switching off the main power, be sure to press the [POWER] key to switch off the sub power for the FJ- |
| 52/42. |
|
|
1 | After carrying out steps 1 |
|
|
|
|
| 2 | Unplug the power cord from the electrical outlet. |
to 3 in "Power Off in Daily |
|
|
|
|
|
| ||
| Operation," turn off the |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| |
| main power switch. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
*If the unit will be out of use for a month or longer, follow steps 1 through 9 of
35