2 Basic Operation

How to Set the [PRINT QUALITY] Menu

1

Press the [PRINT QUALITY] key.

2

Use the [ ] and [ ] keys to choose the printing

 

 

 

mode.

 

 

 

PRINT QUALITY

FINE

3

Press the [

] key to make the setting for the printing

direction.

] and [ ] keys to display the printing

 

Use the [

direction, then press the [ENTER] key.

PRINT QUALITY

BI-DIRECTION

When You Want to Speed Up Printing Time

If you want to speed up printing times, make the setting for the high-speed mode. The setting for the high-speed mode is made with [HIGHSPEED MODE].

Making the setting for the high-speed mode enables high-speed printing, but only when the printing mode is PHOTO or SUPER. (High-speed printing cannot be performed in other printing modes.)

On the [PRINT QUALITY] menu and at the top screen, the display for PHOTO changes to HS-PHOTO, and the display for SUPER changes to HS-SUPER.

Note that the maximum printing width becomes 2 in. narrower only during HS-PHOTO or HS-SUPER printing. Also, you can obtain higher image quality with PHOTO or SUPER than with HS-PHOTO or HS-SUPER.

Maximum printing area (width) during the high-speed mode

FJ-52 1,270 mm (50 in.)

FJ-42 1,016 mm (40 in.)

At the top screen, pressing the [ENTER] key displays the printing width during the high-speed mode while the [ENTER] key is held down.

Top menu

 

 

W 1320 mm

 

W 1270 mm

HS-PHOTO

 

HS-PHOTO

For more information about the printing area, see "4-3 Printing Area."

26