Wireless Router | User Manual | |
|
|
|
|
|
|
¾Channel width - Select the channel width from the
) Note:
If 11b only, 11g only, or 11bg mixed is selected in the Mode field, the Channel Width selecting field will turn grey and the value will become 20M, which is unable to be changed.
¾Max Tx Rate - You can limit the maximum tx rate of the Router through this field.
¾Enable Wireless Router Radio - The wireless radio of this Router can be enabled or disabled to allow wireless stations access.
¾Enable SSID Broadcast - When wireless clients survey the local area for wireless networks to associate with, they will detect the SSID broadcast by the Router. If you select the Enable SSID Broadcast checkbox, the Wireless Router will broadcast its name (SSID) on the air.
¾Enable WDS - Check this box to enable WDS. With this function, the Router can bridge two or more Wlans. If this checkbox is selected, you will have to set the following parameters as shown in Figure
Figure
¾SSID(to be bridged) - The SSID of the AP your Router is going to connect to as a client. You can also use the search function to select the SSID to join.
¾BSSID(to be bridged) - The BSSID of the AP your Router is going to connect to as a client. You can also use the search function to select the BSSID to join.
¾Search - Click this button, you can search the AP which runs in the current channel.
¾Key type - This option should be chosen according to the AP's security configuration.It is recommended that the security type is the same as your AP's security type
¾WEP Index - This option should be chosen if the key type is WEP(ASCII) or WEP(HEX).It indicates the index of the WEP key.
- 45 -
