Rosewill RNX-N150RT user manual Network, 1 LAN

Wireless Router RNX-N150RT User Manual

)Note:

a.The WPS LED on the Router will light green for five minutes if the device has been successfully added to the network.

b.The WPS function cannot be configured if the Wireless Function of the Router is disabled. Please make sure the Wireless Function is enabled before configuring the WPS.

4.5 Network

Figure 4-5 the Network menu

There are three submenus under the Network menu (shown in Figure 4-5): LAN, WAN and MAC Clone. Click any of them, and you will be able to configure the corresponding function.

4.5.1LAN

Choose menu “Network → LAN”, you can configure the IP parameters of the LAN on the screen as below.

Figure 4-6 LAN

¾MAC Address - The physical address of the Router, as seen from the LAN. The value can't be changed.

¾IP Address - Enter the IP address of your Router or reset it in dotted-decimal notation (factory default: 192.168.1.1).

- 31 -