Rosewill RNX-N150RT user manual By PIN, Next

Wireless Router RNX-N150RT User Manual

4.4.2By PIN

If the new device supports Wi-Fi Protected Setup and the PIN method, you can add it to the network by PIN with the following two methods.

Method One: Enter the PIN into my Router

Step 1: Keep the default WPS Status as Enabled and click the Add device button in Figure 4-3,then the following screen will appear.

Step 2: Choose “Enter the new device's PIN” and enter the PIN code of the wireless adapter in the field after PIN as shown in the figure above. Then click Connect.

)Note:

The PIN code of the adapter is always displayed on the WPS configuration screen

Step 3: For the configuration of the wireless adapter, please choose “Enter a PIN into my access point or a registrar” in the configuration utility of the WPS as below, and click

Next.

The WPS Configuration Screen of Wireless Adapter

- 29 -