Rosewill RNX-N150RT user manual Rear Panel, ¾ RESET：

Wireless Router RNX-N150RT User Manual

1.3.2The Rear Panel

Figure 1-2 Rear Panel sketch

The following parts are located on the rear panel (View from left to right).

¾POWER: The Power socket is where you will connect the power adapter. Please use the power adapter provided with this RNX-N150RT 150Mbps Wireless Lite N Router.

¾WAN: This WAN port is where you will connect the DSL/cable Modem, or Ethernet.

¾1,2,3,4 (LAN): These ports (1, 2, 3, 4) connect the Router to the local PC(s).

¾RESET：

There are two ways to reset to the Router's factory defaults:

1)Use the Factory Defaults function on “System Tools → Factory Defaults” page in the Router's Web-based Utility.

2)Use the Factory Default Reset button: With the Router powered on, use a pin to press and hold the Reset button (about 5 seconds) until the SYS LED becomes quick-flash from slow-flash. And then release the button and wait the Router to reboot to its factory default settings.

¾5dBi Wireless antenna: To receive and transmit the wireless data.

- 7 -