Rosewill RNX-N150RT user manual Host Settings

Wireless Router RNX-N150RT User Manual

with the Host Description is Host_1 and MAC Address is 00-11-22-33-44-AA.

2.Click “Access Control → Target” in the left to enter the Target Settings page. Add a new entry with the Target Description is Target_1 and Domain Name is www.google.com.

3.Click “Access Control → Schedule” in the left to enter the Schedule Settings page. Add a new entry with the Schedule Description is Schedule_1, Day is Sat and Sun, Start Time is 1800 and Stop Time is 2000.

4.Click “Access Control → Rule” in the left to return to the Access Control Rule Management page. Select “Enable Internet Access Control” and choose "Deny the packets not specified by any access control policy to pass through the Router".

5.Click Add New... button to add a new rule as follows:

zIn Rule Name field, create a name for the rule. Note that this name should be unique, for example Rule_1.

zIn Host field, select Host_1.

zIn Target field, select Target_1.

zIn Schedule field, select Schedule_1.

zIn Action field, select Allow.

zIn Status field, select Enable.

zClick Save to complete the settings.

Then you will go back to the Access Control Rule Management page and see the following list.

4.10.2Host

Choose menu “Access Control → Host”, you can view and set a Host list in the screen as shown in Figure 4-46.The host list is necessary for the Access Control Rule.

Figure 4-46 Host Settings

- 71 -