Switch is engaged, Motor | Royal Sovereign RSH-380SL specs

Switch is engaged

4.Film is jammed on the rollers.

a.Un-jam the film using a combination of the pressure lever and reverse button.

5.Disconnected motor wire.

a.Check the motor wire connection with PCB.

Wire-motor

6.Defective main motor.

a. Replace the main motor.

Motor

6

Image 8

Royal Sovereign RSH-380SL service manual Switch is engaged, Motor

Contents

MODELRSH-380SL Table of Content Safety Precautions Rollers Not Heating TroubleshootingWire-HeaterWire-Heater Wire-Temp. Fuse Blown burnt wire fuse T/Fuse Rollers Over Heating Connector-Wire SensorWire-T / Fuse No power to the unit Rollers Not Running Switch is engaged Motor Main Power Wires No Main PowerMain Fuse No Electricity Poor Lamination Quality Problem CurlingTransformer is defective a. Replace the transformer Replacing Parts Replacing the Right CoverReplacing the Sub-PCB Replacing the Main PCB Replacing the Heaters Adjustments Adjusting front and rear rollers Pressure Part List Front Table Safety Lever Spcc 1.5T PCB-SUB Assy Explode View Wire Diagram VCC5V Connect part SUB PCB Bimetal135 Wire T/Fuse Micro Switch Wire Safety S/W Wire Motor