Runco VX-22D manual 17. Attaching the Anamorphic Lens to the Lens Adapter Ring

Installation

4.Use the Lens Mounting Screws to attach the Lens Adapter Ring (item #1) to the Pitch Adjustment Yoke (item #2); see Figure 3-17.(Use the round, threaded holes on the yoke.)

5.Use the Height/Y Adjustment T-Screws (item #3), Pitch Adjustment T-Screws

(item #4) and T-Nuts (item #9) to attach the Pitch Adjustment Yoke and Lens Adapter Ring to the Anamorphic Lens Holder. The Yoke should be as close to the primary lens as possible.

6.Attach the lens to the Lens Adapter Ring by threading it clockwise.

Lens threads into ring

SUCO

F

Figure 3-17. Attaching the Anamorphic Lens to the Lens Adapter Ring

40 Runco VX-22d Owner’s Operating Manual