Runco VX-22D manual 1. Serial Commands continued, EXIT Enter

Serial Communications

Table 6-1. Serial Commands (continued)

Command	Description	Response
	Image Preset Commands
SISF 0	Loads “ISF Night” image preset	ISF Night
SISF 1	Loads “ISF Day” image preset	ISF Day
SISF 2	Loads “Custom 1” image preset	Custom 1
SISF 3	Loads “Custom 2” image preset	Custom 2
	Menu Navigation Commands

The following serial commands are meant to emulate buttons on the remote control or DHD Controller front panel. Each button has its own serial command, so effectively it is as if you were using the IR remote only you’ll be doing so via serial commands. These commands provide active OSD responses just like the IR remote.

ENTR	ENTER (or SELECT) button
EXIT	EXIT button
MENU	MENU button
MND	Down-Arrow ( ) button
MNL	Left-Arrow ( ) button
MNR	Right-Arrow ( ) button
MNU	Up-Arrow ( ) button

(none)

Picture Adjust Commands

The following serial commands are meant to emulate the discrete picture adjustment buttons on the remote control unit. Use them in conjunction with MNL and/or MNR to make picture adjustments. For example, to increase Brightness by five increments, send this sequence of commands:

MBR <Enter>

MNR <Enter>

MNR <Enter>

MNR <Enter>

MNR <Enter>

MNR <Enter>

EXIT <Enter>

MBR	Adjust Brightness
MCOL	Adjust Color Level
MCON	Adjust Contrast
MTIN	Adjust Tint

(none)

Runco VX-22d Owner’s Operating Manual 65