Select the zone the key will be configured for. Changes are made for that zone only; default setting is “All Zones.”
Select the source the key will be configured for.
Using + or -, select the keypad key to be configured.
Either “Key Press,” “Key Hold” or “Both” will activate the command.
Name that appears on the keypad display when the command is activated.
Select the type of source command (e.g., CD, DVD, etc.).
Choose Learned IR if the pre-programmed IR code library does not support the source component.
Select the learned source bank to be assigned to the source component. Procedure advances to KEY FUNCTION (step 8)
The key configuration is cleared. Procedure advances to SAVE CHANGES (step 9)
Default selects the same device type and device code previously setup in BASIC SETUP. Procedure advances to KEY FUNCTION (step 8)
(To build macros, see Macro Editor page 62)
(continued)
| INSTALLER |
| INSTALLATION MENU |
9. AUTO PLAY? – | “Yes” tells the CAM6.6 to issue a PLAY command whenever the |
(AtoPl) | source is selected for listening. This option is skipped if the |
| source type (COMMAND TYPE) chosen does not have a PLAY |
| command associated with it. |
10. SAVE CHANGES? – | Select “yes” to save changes. Procedure returns to SOURCE |
(Save?) | NUM to allow configuration of another source. |
KEY CONFIG (KeyCf)
Key Configuration defines
1. ZONE NUM – (Zone#)
2. SOURCE NUM – (Src #)
3. SELECT A KEY – (SelKy)
4. KEY TYPE – (KeyTp)
5. KEY NAME – (KeyNm)
6. COMMAND TYPE – (CmdTp)
a. Selected: Learned IR – (LrnIR)
i. LEARNED SRC – (LnSrc)
b. Selected: Unassigned (Unasg)
c. Selected: Default (Deflt)
d. Selected: Macro: (Macro)
53
