The Diagnostics Menu allows the installer to run a diagnostic check on the keypad and to verify the firmware version. The Diagnostics Menu also contains the update firmware procedure for updating the
To access the Diagnostics Menu, press and hold the Setup button on the right side of the keypad until “DIAGNOSTICS” appears on the display. The menus are outlined in the diagram below.
INSTALLER
KEYPAD DIAGNOSTIC MENU
UNO Keypad Diagnostics Menu
When finished, press and release the Setup but- ton again (except for the Update Firmware where the power must be cycled).
Note: Do not change Controller ID settings in this menu. Controller ID is set in the Controller Setup menu (see Controller Setup Menu on page 72).
77