Russound CAM6.6T Uno Keypad Installation, Keypad Location, Junction Box, UNO-S1, Back Plate

INSTALLER

UNO KEYPAD INSTALLATION

Keypad Location

The best infrared remote performance is achieved with the keypad away from any direct sunlight, plasma TV, and low voltage lighting controls. Also consider convenience when choosing a location.

Choose a place that is easily seen from the posi- tion where a person is most likely to be located.

Check whether or not you can route the wire to the location you have chosen.

Keypad Installation

An UNO keypad has three parts: the keypad, a back plate and a cover plate. To install an UNO keypad, use a UL/CSA approved plastic electri- cal box. Use a double-gang box for UNO-S2 and UNO-TS2. For UNO-S1, use a single-gang box.

•Route CAT-5 wire to the junction box from the CAM6.6.

•Use the supplied 110 punchdown tool to connect each wire to its corresponding color labeled on the punchdown terminal.

•Ensure jumper settings on keypads are in the run positions.

•Mount the keypad in the electrical box and attach the back plate then the cover plate.

•Repeat the steps until all keypads are installed.

Src 3

Junction Box UNO-S1 Back Plate Cover Plate

32