Russound CAM6.6T SRC SEL CMD SrcSC, Suffix Cmd, Command Type, Device Code, Key Function, i. MACRO

INSTALLER

INSTALLATION MENU

9. SUFFIX CMD –	Tells the system whether a command will be issued after the
(Sufix)	selection of the numerical value (e.g., 1, 2 Enter). If “no,” proce-
	dure advances to SAVE CHANGES (step 13)
10. COMMAND TYPE –	Select the type of source command (e.g., CD, TV, etc.).
(CmdTp)
a. Selected: Learned IR	Choose Learned IR if the pre-programmed IR code library does
(LrnIR)	not support the source component.
i. LEARNED SRC –	Select the learned source bank to be assigned to the source
(LnSrc)	component. Procedure advances to KEY FUNCTION (step 12)
b. Selected: Unassigned	The numeric IR Suffix command is cleared. Procedure advances
(Unasg)	to SOURCE NUM (step 1)
c. Selected: Default	Default selects the same device type and device code previously
(Deflt)	setup in BASIC SETUP. Procedure advances to KEY FUNCTION
	(step 12)
d. Selected: Macro:	(To build macros, see Macro Editor page 62)
(Macro)
i. MACRO -	Macro loads a series of commands which are processed when
(Macro)	activated.
ii. MACRO ID –	Enter the macro ID number. Menu advances to SAVE CHANGES
(MacID)	(step 13)
e. All Other Selections:	Procedure advances to DEVICE CODE (step 11)
11. DEVICE CODE –	Source component code for IR control.
(DevCd)
12. KEY FUNCTION –	Select a function (Enter, Play, etc.).
(KeyFn)
13. SAVE CHANGES? –	Select “yes” to save the changes.
(Save?)

SRC SEL CMD (SrcSC)

This procedure permits a command to be sent to the source component when the source component is initially selected. See Source Select Command & # Of Sources - Flow Chart on page 70

1. SOURCE NUM –	Select the source number this command will be configured for.
(Src #)	(Continued next page)

56