Russound CAS44 manual Keypad Front Panel

INSTALLER

COMPONENT GUIDE

Keypad Front Panel

The update jumper for the KP4 (and KPL) is located on the right side of the keypad when facing front. This is covered when a trim plate is installed. Note: The update pins on the KP4 are accessed from the side when the keypad is not installed.

2

DVD CABLE

XM1 AM/FM

Source

KP4 Front View

2

KP4 Top View

1 OS UPDATE/RUN JUMPER -The pins are jumpered when performing a firmware update on the keypad, and removed during normal operation.

1

2 OS UPDATE PORT - Used to update the KP4 and KPL keypad operating system firmware. If an update is released, it will be available online through the Document Center on www.russound.com. Look in the “Firmware and Downloads” section under Multi-Zone product type. The Advanced Programming Cable is available from Russound, Part #2500-521065.

1

Jumpered pins

KP4 Side View

15