INSTALLER
KPL KEYPAD SETUP AND DIAGNOSTIC MENUS
KPL Setup Menu
The KPL Setup menu is used to choose source names, check the version number and perform a Factory Initialization of the CAS44 controller. The menu is outlined in the diagram at right.
To access the Setup Menu, press and release the Setup button on the right side of the keypad until “SrcNm” (source names) appears on the display. Press the Source button to toggle through the menu options, then press the Power button to enter menus. Use the Volume Up/Down buttons to scroll through the selec- tions. Press the Power button to enter a selection.
KPL Setup Menu
SOURCE | SOURCE | FACT INIT | SOURCE | |
Procedure | ||||
|
|
| ||
|
|
| Yes | |
|
| Are You |
| |
|
| Sure? | No | |
|
|
|
When finished, press and release the Setup button again.
KPL Diagnostics Menu
The Diagnostics Menu allows the installer to run a diagnostic check on the keypad and to verify the firmware version of the keypad.
To access the Diagnostics Menu, press and hold the Setup button on the right side of the keypad until “Diags” appears on the display. The menus are outlined in the diagram at right.
When finished, press and release the Setup button again.
Press and | KPL Diagnostics Menu | |||
Hold | ||||
Setup Button |
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DIAGNOSTICS | CONTROLLR |
| PORT ID | KEYPAD ID | SOURCE | VERSION |
SOURCE | ID | SOURCE | SOURCE |
| SOURCE |
|
| Displays |
| Displays |
| Displays | Displays | |
|
| Controller ID |
| Port ID |
| Keypad ID | current firmware | |
|
| number |
| number |
| number | version | |
BUTTON | SOURCE | DISP | SOURCE | DISP | SOURCE | DISP | SOURCE | |
TEST | CHAR | BLOCK | ROW | |||||
|
|
|
| |||||
Press button |
|
|
|
|
|
|
| |
to be tested |
|
|
|
|
|
|
| |
|
| Press |
| Press |
| Press |
| |
|
| Vol Up/Dwn |
| Vol Up/Dwn |
| Vol Up/Dwn |
| |
|
| to scroll |
| to scroll |
| to scroll |
| |
|
| characters |
| blocks |
| rows |
|
35
